C2 Premium clock

This clock replaces the manufacturers clock in your CD/DVD player and offers exceptional timing and detail allied to delicate treble reproduction and extended bass. Quite possibly the best upgrade for any cd player.

This clock WILL out perform clocks costing twice the price!

Price: £145 inc vat

Features:-

• Accuracy: +/- 1ppm
  
• Measured Jitter less than 2PS
• Jitter less than 9PS on divide by 2 output
• Jitter less than 15PS on divide by 4 output
• On board SPower low noise regulation
• Very low noise secondary precision reference 3.3V
• Super low ESR high ripple Oscon Polymer SEPC decoupling capacitors on digital circuit
• Very low ESR Rubycon ZA decoupling capacitors psu
• High Precision oscillator
• Advanced logic gates AHCT
• X1 Direct output (1X)
• X1 Buffered output (2x)
• X1/2 Buffered output (x2)
• X1/4 Buffered output (x2)
• Gold plated contacts
• 9V to 15V input
• LxW 53mm x 32mm
• currently available in popular frequencies, including:
  • 8.46 Mhz
  • 11.2896 Mhz
  • 12.00 Mhz
  • 16.93 Mhz
  • 22.5760 Mhz
  • 24.576 Mhz
  • 27.000 Mhz
  • 33.86 Mhz
• Find your cd player
• Clock frequencies page
• Fitting instruction page

Typical uses:-

• Clocking DACs, Decoders & Servos

• TDA1541 dac (2x X1/2) , SAA7210 (X1) & SAA7220 (X1) chip set requires multiple clock inputs to really make huge gains in sound quality. The C2 can reclock all four pins.

• Marantz CD63 family Dac and Servo clocking (16.934 Mhz & 8.46 Mhz)

Customer comments

"It sounds absolutely awesome! The sound has definately changed. The blacks are blacker and the whites are whiter. The seperation is to beheld. The sound has become smoother and more refined (to the point that I put the rubbish opamps back into my amp to make sure it was the clock making the difference!).
There is an openness and accuracy to the sound and its sooo sooo easy to listen to. The harsh edge I'd created (without realising) in chasing detail from this TDA1541 has been tamed with no loss of resolution. It's an altogether fuller sound with all the weight you could need. I cannot fault it in any way especially as it replaced a Trichord Clock 4"

Ian B

"I originally purchased a competitors clock 3 with the outboard 12v supply.  I was very impressed.  About 2 years later I purchased a 4S to be used with this same supply.  It was so much better!  I was thrilled!  Then came the C2.  The C2 was more open, natural, dynamic, and effortless ...and my C2 has only been "on" for about 4 days!"

T.B